Problems with large protein
Posted 12 March 2009 - 06:03 AM
I have problems a western blot, which is supposed to detect a large protein (135kDa)
It seems as if already the gel electrophoresis does not work. I used a 7,5 % gel (6.5 ml water; 3 ml 1.5 M Tris pH 8.8; 120 mikrol.; SDS 10%; 2.3 ml PA 40%; 60 mikrol. APS 10%; 6 mikrol. TEMED) and did electrophoresis at 60 V for an hour and at 100 V for the rest of the time.
Does anybody have an idea what I could do better?
Posted 12 March 2009 - 09:44 AM
1. Use smaller 0.75 mm gels if your not already doing so. It may also be useful to load more protein.
2. Do not soak/equilibrate your gels in transfer buffer before the transfer.
3. Use larger PVDF pore membrane 0.45.
4. Transfer with Amps. I used 0.4 Amps / transfer box for 90 min for bigger proteins. Keep things cold....ice or 4 degrees.
5. I have found the need to add SDS to transfer buffers. If you use 10% Methanol try adding 0.02% SDS to the transfer buffer. If you use 20% methanol try adding 0.05% SDS to your transfer buffer.
6. After transfer, dip PVDF in methanol for a few seconds, then let it dry on filter paper. This fixes the proteins to the membrane. Simply reactivate in methanol until membrane is translucent, wash then move onto blocking.
7. Block with lower %'s of blocking buffer (try 1% milk overnight instead of 5% for 1 hour).
Hope this helps.
Posted 12 March 2009 - 04:34 PM
I use a 6% gel and run it at 25mA till the dye front runs out. This is for proteins in the size of 250 kDa. For proteins which are around 400kDa, I overrun the gel for 15 minutes. Works very well.
Posted 13 March 2009 - 08:55 PM