Jump to content

  • Log in with Facebook Log in with Twitter Log in with Windows Live Log In with Google      Sign In   
  • Create Account

Submit your paper to J Biol Methods today!
Photo
- - - - -

Making TE buffer for RNA disolution


  • Please log in to reply
4 replies to this topic

#1 saibo

saibo

    member

  • Active Members
  • Pip
  • 6 posts
0
Neutral

Posted 02 February 2005 - 08:50 PM

Hi all,

We cannot use DEPC to treat TE buffer; so how do you prepare TE buffer for RNA disolution? Although I use DEPC-treated water to make TE buffer, but I am still afraid that RNase can contaminate through EDTA powder or while pH determination.

Any advice will be appreciated.

Thank you.

#2 fred_33

fred_33

    Veteran

  • Active Members
  • PipPipPipPipPipPipPipPipPipPip
  • 288 posts
0
Neutral

Posted 03 February 2005 - 12:57 AM

hi
usually i don't use te buffer for rna dissolution.
Take care of every material used (pipette tips, falcon... ) and normally everything should be ok. Don't forget to store rna at -80░ and keep them on ice every time. For dissolution you can make it at room temperature but take care of concentration of rna. If they are too concentrate, they probably form a gel.
I resuspend rna in FRESH DEPC treated water.

For EDTA, due to the fact you use DEPC treated water for dissolving it, sterilized material for dissolution and preservation, and sterilize edta solution (filtration onn 0.22Ám filter), there will probably have no chance of an rnase contamination. Moreover if edta powder is well used, i mean never put back an excess of powder in the stock, there is probably no contamination.

For example, with good attention, i have an total RNA solution of very good quality, and have made it more tan a year ago !


Hope helps.

Edited by fred_33, 22 February 2005 - 05:59 AM.


#3 marc_U7snurp

marc_U7snurp

    member

  • Active Members
  • Pip
  • 6 posts
0
Neutral

Posted 02 March 2005 - 02:15 PM

Hiya

I use as well just DEPC water for dissolving RNA.
Whilst working with RNA I use filtertips and clean my bench before with EtOH. Always worked fine and never had problems

Cheerz

Edited by marc_U7snurp, 02 March 2005 - 02:16 PM.


#4 fred_33

fred_33

    Veteran

  • Active Members
  • PipPipPipPipPipPipPipPipPipPip
  • 288 posts
0
Neutral

Posted 03 March 2005 - 01:02 AM

hi
just for completing my answer and marc_U7snurp's one, i wash my bench too with detegents and after with ethanol (to minimize ethanol induced bacterias' fixation on bench), and after i put a clean aluminium sheet.

For a good extraction, you'll need to be quick in the steps, in order to minimize time of extraction and risks of degradation. And try to be the most in ice.

Fred.

#5 Helios

Helios

    member

  • Active Members
  • Pip
  • 27 posts
0
Neutral

Posted 13 November 2009 - 06:59 AM

hi
i use rnase/dnase free water from invitrogen for dissolution..
also i make sure of cleaning my bench and labware with rnaseZap from ambion before working..




Home - About - Terms of Service - Privacy - Contact Us

©1999-2013 Protocol Online, All rights reserved.