Jump to content

  • Log in with Facebook Log in with Twitter Log in with Windows Live Log In with Google      Sign In   
  • Create Account

Submit your paper to J Biol Methods today!
Photo
- - - - -

Newbie at Flow cytometry so I need a lot of help


  • Please log in to reply
7 replies to this topic

#1 Peniel

Peniel

    Enthusiast

  • Active Members
  • PipPipPipPipPip
  • 34 posts
1
Neutral

Posted 12 June 2014 - 07:54 AM

Hi Everyone,

 

I am not familiar with Flow cytometry but I need to run one to check the expression of ALK in my cell lines. I have a positive and a negative control cell line. I have also purchased the isotype control antibody. This antibody has not been optimized for FLOW but has been used for IHC so it is a novel attempt. Can anyone give/suggest a protocol that works and will be easy for me to follow? I will really appreciate all the help I can get.  I need to get this done as soon as possible.

 

Thanks a lot in advance



#2 Tabaluga

Tabaluga

    Making glass out of shards

  • Active Members
  • PipPipPipPipPipPipPipPipPipPip
  • 434 posts
54
Excellent

Posted 12 June 2014 - 08:42 AM

Is ALK expressed in the surface, cytoplasm or nucleus (or more than one location)? Asking to determine if you need a surface staining protocol or an intracellular one.


Il dort. Quoique le sort fût pour lui bien étrange,
Il vivait. Il mourut quand il n'eut plus son ange;
La chose simplement d'elle-même arriva,
Comme la nuit se fait lorsque le jour s'en va.

 


#3 Peniel

Peniel

    Enthusiast

  • Active Members
  • PipPipPipPipPip
  • 34 posts
1
Neutral

Posted 12 June 2014 - 08:47 AM

Is ALK expressed in the surface, cytoplasm or nucleus (or more than one location)? Asking to determine if you need a surface staining protocol or an intracellular one.

Thanks Tabaluga, ALK has both extracellular and transmembrane domain.



#4 Tabaluga

Tabaluga

    Making glass out of shards

  • Active Members
  • PipPipPipPipPipPipPipPipPipPip
  • 434 posts
54
Excellent

Posted 12 June 2014 - 08:54 AM

I assume your antibody targets the extracellular part, as is often the case with transmembrane proteins. Then you can do a surface staining. I forgot to ask one thing - is your AB and isotype ctrl directly labeled with a fluorochrome or not ?


Il dort. Quoique le sort fût pour lui bien étrange,
Il vivait. Il mourut quand il n'eut plus son ange;
La chose simplement d'elle-même arriva,
Comme la nuit se fait lorsque le jour s'en va.

 


#5 Peniel

Peniel

    Enthusiast

  • Active Members
  • PipPipPipPipPip
  • 34 posts
1
Neutral

Posted 13 June 2014 - 12:09 AM

I assume your antibody targets the extracellular part, as is often the case with transmembrane proteins. Then you can do a surface staining. I forgot to ask one thing - is your AB and isotype ctrl directly labeled with a fluorochrome or not ?

It is not directly labelled so I will be using a labelled secondary antibody.



#6 Tabaluga

Tabaluga

    Making glass out of shards

  • Active Members
  • PipPipPipPipPipPipPipPipPipPip
  • 434 posts
54
Excellent

Posted 14 June 2014 - 03:37 AM

Here I wrote you a general protocol like I used it for indirect FACS surface stainings; for FACS Buffer you can use something like PBS/1% BSA or PBS/5% FBS. You can try this one (of course there is a variety of other protocols available on the web as well). If anything is unclear, just ask.

 

Harvest cells, count them and resuspend a certain number (i.e. 10^6 cells/tube)

 

Wash in FACS Buffer (=resuspend, centrifuge and discard supernatant)

 

Incubate with primary antibody/isotype ctrl (diluted in FACS Buffer) at appropriate concentration for 1 hour at room temperature.

 

(You may need to titrate in order to find the best concentration, or for a start you can try out the manufacturer's recommendations or check if the antibody was already used in a publication and how it was used there. Same goes for time and temperature; do you have anything to go upon like a manufacturer's recommendation ? Also note that the isotype ctrl should be used in the same amount as the antibody - since concentrations may be different, you may need to calculate to really use the same amount.)

 

3x wash with FACS Buffer

 

Incubate with secondary antibody (diluted in FACS Buffer) at appropriate concentration (again, you may need to titrate and find the right conditions) at room temperature for 35 min in the dark

 

3x wash with FACS Buffer

 

Resuspend in FACS Buffer and measure; keep the samples cold and dark (e.g. in a closed ice box) and measure as soon as possible


Il dort. Quoique le sort fût pour lui bien étrange,
Il vivait. Il mourut quand il n'eut plus son ange;
La chose simplement d'elle-même arriva,
Comme la nuit se fait lorsque le jour s'en va.

 


#7 Peniel

Peniel

    Enthusiast

  • Active Members
  • PipPipPipPipPip
  • 34 posts
1
Neutral

Posted 16 June 2014 - 01:26 AM

Here I wrote you a general protocol like I used it for indirect FACS surface stainings; for FACS Buffer you can use something like PBS/1% BSA or PBS/5% FBS. You can try this one (of course there is a variety of other protocols available on the web as well). If anything is unclear, just ask.

 

Harvest cells, count them and resuspend a certain number (i.e. 10^6 cells/tube)

 

Wash in FACS Buffer (=resuspend, centrifuge and discard supernatant)

 

Incubate with primary antibody/isotype ctrl (diluted in FACS Buffer) at appropriate concentration for 1 hour at room temperature.

 

(You may need to titrate in order to find the best concentration, or for a start you can try out the manufacturer's recommendations or check if the antibody was already used in a publication and how it was used there. Same goes for time and temperature; do you have anything to go upon like a manufacturer's recommendation ? Also note that the isotype ctrl should be used in the same amount as the antibody - since concentrations may be different, you may need to calculate to really use the same amount.)

 

3x wash with FACS Buffer

 

Incubate with secondary antibody (diluted in FACS Buffer) at appropriate concentration (again, you may need to titrate and find the right conditions) at room temperature for 35 min in the dark

 

3x wash with FACS Buffer

 

Resuspend in FACS Buffer and measure; keep the samples cold and dark (e.g. in a closed ice box) and measure as soon as possible

Thanks a lot Tabaluga. The antibody has not been used for flow cytometry so there is no manufacturers recommendation for this application. For Immunohistochemistry it is recommended to be used at 1:250 dilution. Do I need to do replicate or it does not matter.



#8 Tabaluga

Tabaluga

    Making glass out of shards

  • Active Members
  • PipPipPipPipPipPipPipPipPipPip
  • 434 posts
54
Excellent

Posted 16 June 2014 - 04:58 AM

You should titrate the AB, so try with several dilutions. 1:250 could be one of them.
As for replicates, it is always recommendable but for your initial experiments (AB titration, adjusting the settings etc.) I'd say you can do without.

Il dort. Quoique le sort fût pour lui bien étrange,
Il vivait. Il mourut quand il n'eut plus son ange;
La chose simplement d'elle-même arriva,
Comme la nuit se fait lorsque le jour s'en va.

 





Home - About - Terms of Service - Privacy - Contact Us

©1999-2013 Protocol Online, All rights reserved.