3 replies to this topic

[n00b]

Hello,

Someone in our lab is trying to purchase the following connectors.



They are very small, as you can see, about a 2mm diameter on the ends. Does anyone know where I can purchase these?

Thanks.

[phage434]

Those are male and female luer connectors, with barb fittings for connecting small diameter tubing.  You can likely get these at Upchurch, Cole-Palmer, possibly at Small Parts.  They are much more expensive than they should be.
Also check Amazonsupply.com:
http://www.amazonsup...p_iss_383606011

[mdfenko]

the bottom one is a barbed straight connector for tubing with an id of 1/4" to 1/2". you can purchase from bel-art products (they also sell assortments and others). cole parmer has assortment packs.

the middle one appears to be a luer to barbed straight connector.

the top appears to be half of a barbed quick connect.

[phage434]

The top one is a male luer connector minus the housing that clamps to the female luer.  It's just like the end of a plastic syringe minus the outer part.