Hello, can any one post ETBr post- satining protocol and for how long the gel should be put in. dose it have to be in agitation postion? please help.. Thanks
0
3 replies to this topic
#2
-
- Active Members
-
- 41 posts
Enthusiast
Posted 16 June 2010 - 05:43 AM
Fill a small container with TAE or TBE (what you used to run your gel) and add EtBr (colour of the buffer should be reddish). Put your gel in the container and wait as long as you have patience 
...then check. If the bands are not bright enough stain longer
Good luck
...then check. If the bands are not bright enough stain longerGood luck
#3
-
- Active Members
-
- 577 posts
Brain on a stick
Posted 16 June 2010 - 06:25 AM
Prepare 0.5 ug/ml EtBr in your running buffer (TAE or TBE), completely soak the gel in it.
Stain for 10-30 minutes.
You can reuse and store the staining solution up to several months, if you keep it in fridge in the dark.
Stain for 10-30 minutes.
You can reuse and store the staining solution up to several months, if you keep it in fridge in the dark.
Our country has a serious deficiency in lighthouses. I assume the main reason is that we have no sea.
#4
-
- Active Members
-
- 3,047 posts
Hmmm, I think it's working
Posted 16 June 2010 - 05:45 PM
fysio lab, on Jun 16 2010, 06:43 AM, said:
add EtBr (colour of the buffer should be reddish).
Usually the solution should be so dilute that you can't see the EtBr colour. If it is reddish, you have added too much.
