This is a cached page for the URL (http://www.genetics.wustl.edu/tslab/gonad_fixation.html). To see the most recent version of this page, please click here.
Protocol Online is not affiliated with the authors of this page nor responsible for its content.
About Cache
Gonad Fixation
Gonad Fixation
- From R. Francis -

A. Methanol
Methanol fixation is quick, easy, and gives satisfactory nuclear morphology after DAPI staining. However, methanol-fixed gonads break easily and are more difficult to mount than formaldehyde-fixed gonads. Fix dissected gonads in 3 ml of cold (-20¡) methanol for 5 min. Using a pasteur pipette, transfer to a glass conical glass tube, add 2ml PBTw and spin 1 min in a clinical benchtop centrifuge at setting 2. Remove the supernatant and wash 2x in several ml PBTw. Fixed gonads can be stored in methanol at -20¡ for a week or two before use. 

B. Formaldehyde
Gives better nuclear morphology and less shrinkage than MeOH fixation.  Fix in 2 - 3 ml of 3% Formaldehyde/0.1 M K2HPO4  (pH 7.2) for 1 hr. After fixation,  transfer to a 5 ml glass conical tube (The more narrow the bottom is, the better), add a few mls of PBTw and spin 1 min in clinical benchtop centrifuge at setting 3.  Remove super, wash 1x in PBT, and then post-fix in 2 ml of 100% Methanol (from -20 C stock) for 5 min.  Fill tube with PBT, spin, remove super ( I usually leave about 200 ul), and transfer the worms into a small (6 mm X 35 mm) glass culture tube (siliconized, Kimax brand) .  Alternatively, fixed gonads can be stored in MeOH at -20C for a few days.  Storing in methanol for longer periods is possible, but subsequent staining seems of a lower quality. 

C. Methanol / Formadehyde
This fixation protocol is fast and gives better DAPI-nuclear morphology than methanol by itself. To make the fixative, mix 10 mls of 16% formaldehyde, 3.3 mls of 0.1 M K2HPO4 (pH7.2), and 40 ml methanol. This solution is stored at -20¡ and is used as described for methanol (but increase fixation time to 10 min). 

D. Glutaraldehyde / Formaldehyde
Glutaraldehyde / formaldehyde fixation works well for germline RNA in situs: gonads remain intact through extensive protease treaments (40 ug/ml Proteinase K for 30 min) that would destroy gonads fixed in formaldehyde alone. This fixation has also been used with good results with some antibodies. Mix 10 ml of 16% formaldehyde, 0.53 ml of 25% glutaraldehyde (EM grade), and 43 ml of 0.1 M K2HPO4 (pH 7.2). Store the fixative in 5-10 ml aliquotes at -20¡C. Fix gonads for 2 hr at rom temperature with a 5 min MeOH post-fix (as described above for formadehyde).

Materials
PBS: Sambrook et al. (Molecular Cloning).
PBTw: PBS containing 0.1% Tween 20.
3% formaldehyde / 0.1 M K2HPO4 (pH7.2): Prepare from sealed ampoules of 16% EM grade formaldehyde (EM Sciences). Freeze any excess. This solution can also be made from paraformaldehyde powder.
Methanol: 100% stock kept at -20¡C. 



Last revised 28 September 1997